Touch Screen Salt Spray Test Chamber F-SSTC105 has the temperature range of the Saline test method of 47±1 °C and Corrosion Test of 63±1 °C with a chamber capacity of 1500L. It is Controlled by the following system Hydrometer, salinometer, fog collector and glass bar. It has programmed and continuous systems of spraying assigned using a touch screen display. The test can be performed safely as it is protected with an overheating prevention mechanism and breakdown indicator light. The Saline Concentration should be maintained as a 5% concentration of NaCl, or for every Litre of 5% NaCl add 0.26g CuCl2H2O.
Saline test (NSS ACSS) 35±1 °C; Corrosion Test (CASS)50±1 °C
Pressure Bucket Temperature
Saline test method (NSS ACSS) 47±1 °C / Corrosion Test (CASS)63±1 °C
Saline Concentration
5% concentration of NaCl, or every Litre 5% NaCl add 0.26g CuCl2H2O
External/Internal Material
P.V.C & P. P
Compressed Air Pressure
1.0 to 6.0 Kgf
Spray Volume
1.0 to 2.0ml /80cm2/h (working at least 16 hours, and take the average value)
Spray Form
Continuous Spraying or Programmable Spraying
Salt Spray Vehicle System
Air+acid(base)liquid
Chamber material
SUS 304 & 316stainless steel heater+taflon
Controller system
Hydrometer, salinometer, fog collector, glass bar
Safety Devices
Overheating prevention circuit-breaker, dehydration and
It can spray a volume of 1.0 to 2.0ml
It is provided with both programmed and continuous models of spray modes
It follows the saline test method and corrosion test which are controlled using a touch screen
The unit has the Overheating prevention circuit-breaker for the longevity of the device
The chamber is made up of stainless steel material
It is used for the surface treatment of various materials, including paint, electroplating, organic and inorganic coating, metal products, carries out the anti-corrosive treatment to test the corrosion resistance of the products
